Compatible with:

Capsule III, D2420, Capsule 3 Laser (ATV), D2426

First, use the autofocus feature to keep the image as sharp as possible without any manual adjustment.

1. Activate Autofocus by going to Settings > Projector Settings > Focus Settings > Auto Focus At Startup / Auto Focus After Movement.

2. Slightly move the device or press the focus button on the remote to trigger autofocus and auto keystone correction.

If that doesn't work, try the following:

3. Adjust the projection angle and direction, as well as the height of the projector.

4. Go to Settings > Projector Settings > Focus Settings and press Manual Focus Correction to adjust the focus.

5. Update your Nebula to the latest firmware version by going to Settings > Device Preferences > About > System Update > Check for update.

6. Restart your projector by going to Settings > Device Preferences > Restart.

If you still have a blurry image, contact us and include a short video showing what happens when you adjust the focus. When you email us, mention that you tried the recommended steps. This will help us find a solution for you much faster.